Ultraclear Sealant
Tytex Ultraclear is a premium quality crystal clear mid modulus MS polymer based adhesive sealant. Found to be one of the clearest adhesives on the market today. It is odourless, neutral and free of solvents, isocyanes, fungicides, halogens and acids. Ideal for internal applications and bonds without primer on almost all construction materials including natural stone, all timbers, brick, concrete and more. Outstanding results on all joining and sealing applications where high transparency is necessary. Has good water and moisture resistance.
Download
The Tech Sheet
More Details
Get in Touch
Superior strength once cured
Permanent Elasticity
Paintable
By means of humidity.
- Most construction and building applications
- All internal joining and sealing applications
- External applications where only water resistance is required
- Joints in bathroom and kitchen applications
- Glass
- Mirror
- Metals including copper and brass
- Natural stone
- Concrete and brick
- Polystyrene
- Timber/hardwoods such as frame and panel construction, skirtings, architraves
Preparation
The substrate must be fixed and rigid enough, and can be slightly damp. The materials to be joined must be clean and free from dust and grease. If necessary, degrease using Tytex cleaner, MEK, solvent, alcohol, or ethanol.
Application
Apply with the supplied nozzle in strips or dots to the base or on the element to be bonded. The strips must be applied in vertical rows. Apply the strips parallel to each other, to allow the humidity to reach the adhesive between the strips.
Bring together the parts to be joined as quickly as possible, at least within 10 minutes (this depends on the temperature and relative humidity level).
Finally, push down one over the other firmly, cramp or tap with a rubber hammer.
All our products are available for purchase from the stockist below, please click on the logo to buy from your chosen stockist.
