Expanding Foam
One component self expanding PU foam which expands when applied through an applicator gun. Tytex Expanding Foam is used for fixing door and window frames, filling and insulating cracks or gaps, for general adhering purpose, and insulating surroundings of heater cores, electric wires, hot or cold water pipes.
Download
The Tech Sheet
More Details
Get in Touch
Save time through rapid expanding formula
Maximum foaming for the largest gaps
High insulating properties
Suitable for:
- Installing window and door frames
- Filling cavities and openings
- Ideal to create an acoustic barrier
- Use to improve insulation in some areas
- Sealing openings in roof structures
NB. not suitable or polyethylene, polypropylene and other low surface energy materials.
Tytex Expanding Foam should be used with a suitable applicator gun straw.
In order to accelerate the curing, it is beneficial to clean up and moisturise the application surface.
The foam can should be at the ambient room temperature (5°C – 30°C).
Shake the can thoroughly before use.
Turn the can upside down and insert the valve into the applicator gun by screwing clockwise until tight. Pull the gun trigger in order to release the foam out of the can.
Consider that the foam will expand during curing.
‘Tytex Expanding PU Foam Gun Cleaner’ should be used for cleaning the foam in unwanted areas.
All our products are available for purchase from the stockist below, please click on the logo to buy from your chosen stockist.
